VidyoGateway Administrator Guide
1. Introduction
2. VidyoGateway configuration procedure
- Make configurations on your VidyoGateway
- Make configurations on your VidyoPortal for your VidyoGateway
- Make additional VidyoGateway configurations
3. Configure your server via the System Console
- Log in to the System Console and change the default password
- View application and system information
- View application information
- View system information
- Set the hostname and the domain
- Configure the Production Interface
- View the Production Interface active information
- Configure the IPv4 Production Interface
- Configure IPv4 Static routes
- Configure the IPv6 Production Interface
- Configure the MTU and auto negotiation for the Production Interface
- Configure the Maximum Transmission Unit (MTU)
- Configure auto negotiation
- Configure the Management Interface
- View the Management Interface active information
- Configure the IPv4 Management Interface
- Configure IPv4 Static Routes
- Remove IPv4 Static Routes
- Configure the MTU and auto negotiation for the Management Interface
- Configure time servers (NTP)
- Configure users
- View active user information
- Add users
- Remove users
- Change user passwords
- Configure RADIUS authentication
- Access tools
- Perform advanced configuration
- Configure FIPS
- Maintain pre-shared keys
- Run the recovery utility
- Taking snapshots
- Restore snapshots
- Delete snapshots
- Perform a factory restore
- Configure SNMP
- Enable, disable, and restart SNMP
- Configure SNMP v2 communities
- List the SNMP v2 communities
- Add SNMP v2 communities
- Remove an SNMP v2 community string
- List SNMP v2 notifications
- Add SNMP v2 notifications
- Remove SNMP v2 notifications
- Configure SNMP v3 users
- List SNMP v3 users
- Add SNMP v3 users
- Remove an SNMP v3 user
- List SNMP v3 notifications
- Add SNMP v3 notifications
- Remove SNMP v3 notifications
- Configure SSH
- Manage static hosts
- View active information
- Add static hosts
- Remove static hosts
- Manage Vidyo Apache settings
- Display current settings
- Set modern or intermediate Apache profiles
- Enable or disable OCSP stapling
- Reload Apache
- Manage VidyoPlatform API users
- List API users
- Add API users
- Remove API users
- Update the user key
- Configure remote Vidyo Support access
- Enable remote Vidyo Support access
- Disable remote Vidyo Support access
- Reboot the System Console
- Shut down the System Console
- Log in to the Admin Portal
- Set the language for the VidyoGateway Admin Pages
4. Configure RADIUS
- View the current RADIUS configuration
- Configure RADIUS
- Add additional servers
- Create a RADIUS-enabled account
- View a RADIUS-enabled account
- Remove a RADIUS-enabled account
- Disable RADIUS authentication
- Enable FIPS mode
- Disable FIPS mode
5. Configure your system
- Configure the General settings
- Configure the VidyoPortal settings
- Configure SIP settings
- Configure H.323 settings
- Configure the H.323 settings when using a standalone VidyoGateway
- Configure the H.323 settings when clustering your VidyoGateways
- Configure audio settings
- Configure video loopback settings
- Configure Quality of Service (QoS) settings
- Configure QoS settings with IP precedence selected as the Type of Service
- Configure QoS settings with DSCP selected as the Type of Service
- Configure prompts and call control via DTMF tones
- Configure advanced settings
- Configure access control settings
- VidyoGateway clusters
- Configure VidyoGateway clusters
- Clustering benefits
- Cluster configuration with a H.323/SIP gatekeeper interface
- Deploy multiple VidyoGateway clusters
- About clustering
- Configure clusters
- Clustering procedure overview
- Configure your Standalone VidyoGateway
- Configure Controller 1
- Configure nodes for the active controller in cluster mode
- View and edit the default node configuration
- Perform an individual node configuration
- Place VidyoGateway cluster nodes into maintenance mode
- Enable VidyoGateway cluster nodes
- Configure Controller 2
- Configure your cluster node
- Manage services
- Add a service
- Activate and deactivate services
- Delete a service
- Edit a service
- Call types and service examples
- H.323 outgoing call examples
- H.323 incoming call examples
- SIP incoming call using a prefix example
- SIP incoming URI dialing example
- Dial from an H.323 endpoint into a Vidyo PIN-protected room
- TCS4 delimiters
- Configure Integrated Voice Response (IVR) sets
- Enable your IVR settings
- Configure General IVR settings
- Configure Appearance IVR settings
- Configure VidyoGateway IVR screen instruction settings
- Configure VidyoGateway IVR screen prompt settings
- Import and export VidyoGateway IVR media and prompt settings
- Import IVR media and prompt settings
- Export IVR media and prompt settings
- Enable and disable VidyoGateway IVR settings
- Check the status of your VidyoGateway
- View call statistics
- Perform diagnostics
- Capture and download system logs
- Run diagnostic logs
- View diagnostic logs
- Download diagnostic logs
- Configure a public IP address and view your VidyoGateway network sets
- Configure a public IP address and enable Static NAT mode
- View your VidyoGateway network settings
- Secure your VidyoGateway system with SSL and HTTPS
- Import, export, and regernerate an SSL private key
- Import an SSL private key
- Regenerate an SSL private key
- Generate and view an SSL CSR
- Generate an SSL CSR
- View an SSL CSR
- About certificates received from your certificate authority
- Certificate files versus bundles
- Upload or edit your server certificate
- Configure HTTPS port settings for your Admin Pages
- Import Client Root CA Certificates from the Advanced tab
- Enable HTTPS on your Vidyo server
- Enable HTTPS and HTTP
- Enable HTTPS only
- Configure your Vidyo server’s Management Interface and port
- Enable the Management Interface in the System Console
- Move your VidyoGateway Admin Page to the Management Interface
- Configure OCSP
- Enable OCSP from the VidyoGateway
- Disable OCSP from the VidyoGateway
- Disable OCSP from the System Console
- Upgrade your VidyoGateway
- Shut down or reboot your VidyoGateway
- Shut down your VidyoGateway server
- Reboot your VidyoGateway server
- Extend your VidyoGateway session
- Log out of your VidyoGateway
6. Audit
- Download audit logs from your VidyoGateway
- Audit Log content
- Content captured in the Audit Log
- Sample Audit Log content
7. Integrate VoIP phones and IP PBXs
- Network topology
- Connect to VidyoConferences from VoIP phones
- Connect to VidyoConferences via an IP PBX
8. Integrate direct phone calls with IVR functionality
More info
Vidyo compatibility matrix for on-premises
Vidyo Anchor release compatibility matrix
Copyright
© 2024 An Enghouse Vidyo Company all rights reserved. Enghouse Vidyo’s technology is covered by one or more issued or pending United States patents, as more fully detailed on the Patent Notice page of Vidyo's website http://www.vidyo.com/company/patent-notices/, as well as issued and pending international patents. The VIDYO logotype is a registered trademark of Vidyo, Inc. in the United States and certain other countries, and is a trademark of Enghouse Vidyo throughout the world. Vidyo family of marks are trademarks of Vidyo, Inc. in the United States and throughout the world.
